14k Scissor Flush Mount
Alignment Lift
PRODUCT DESCRIPTION
John Bean® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.
Locked & Lighted models provide enhanced performance allowing the technician to perform critical tasks while minimizing alignment process operations, by illuminating both inspection and adjustment areas and by sequencing the locking of alignment plates.
Part Number: EELR594A
14k Scissor Standard Bay Alignment Lift Locked & Lighted (Flush Mount)
Maintenance reduced rear slip plates use oversized, encapsulated bearings that roll upward to protect against environment debris.
Four hydraulic cylinders in a cross-aligned arrangement provide secure lifting power and added safety.
Approach ramps are equipped with end sliders to minimize noise and reduce floor damage.
Adjustable maximum lift height suits locations with low ceilings.
Saftey systems include:
» Mechanical locking with pneumatic safety lock release from the control console
» Flow sensing valves within the hydraulic control circuit
» Redundant hydraulic safety system with cross aligned hydraulic circuitsOn-board Filter/Regulator/Lubricator (FRL) provides clean and lubricated air to help reduce maintenance and protect pneumatic systems.
Professional pretreatment and powder coated painted surface.
Models equipped with locks and lights include the following features:
» Ease locking control activation from the lift console to reduce walking and effort from resetting alignment pins in plates
» Locking components made from corrosion resistant materials
» Illuminate alignment adjustment and calibration areas
» Front LEDs are mounted in the front turnplate base to easily accommodating varying vehicle wheel tracks
» Rear LEDs are strategically positioned on the rear slip platesAll models have been tested and validated by an independent third party to the ANSI/ALI automotive lift standard, ALCTV-2011.
MEDIA
TECH SPECS
| Capacity | Kg |
| Capacity | 14000 lbs |
| Lifting times | s |
| Lowering times | s |
| Lifting height | 72 inch |
| Lifting height | mm |
| Maximum pad height from floor | mm |
| Maximum pad height from floor | inch |
| Drive-through width | inch |
| Drive-through width | mm |
| Motor | |
| Motor | 3 Hp |
| Power supply | 230V 1Ph 50/60Hz |
| Distance between columns | mm |
| Distance between columns | inch |
| Short arm extraction | mm |
| Short arm extraction | inch |
| Long arm extraction | mm |
| Long arm extraction | inch |
| Minimum ceiling height | mm |
| Minimum ceiling height | inch |
| Minimum concrete thickness | mm |
| Minimum concrete thickness | inch |
| Net weight | 5490 lbs |
| Width Between Runways | 38 inch |
| 4 Wheel Alignment Wheelbase | 88 - 155 inch |
| 2 Wheel Alignment Wheelbase | 180 inch |
| Console Dimensions DxWxH | inch |
| Air Supply Requirements | 90 - 120 Psi |
| Front Accessibility | |
| Overall Length | 271 inch |
| Service Wheelbase | 194 inch |
| Overall Width | 95 inch |
| Column Height | inch |
| Column Width | inch |
| Column Depth | inch |
| Height of Lifting Fork | inch |
| Length of Fork | inch |
| Lifting Capacity Per Column | lbs |
| Lifting Speed | 80 s |
| Load Capacity Per Set of Four Columns | lbs |
| Load Capacity Per Set of Six Columns | lbs |
| Lowered Wheel Fork Height | inch |
| Lowering Speed | s |
| Runway Width | 26 inch |
| Weight per Column | lbs |
| Width of Lifting Fork | inch |
Versions
John Bean® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.
John Bean® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.
John Bean® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.
Locked & Lighted models provide enhanced performance allowing the technician to perform critical tasks while minimizing alignment process operations, by illuminating both inspection and adjustment areas and by sequencing the locking of alignment plates.
John Bean® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.
Locked & Lighted models provide enhanced performance allowing the technician to perform critical tasks while minimizing alignment process operations, by illuminating both inspection and adjustment areas and by sequencing the locking of alignment plates.
