9k Double XL

Automotive Lift

Product range
General Repair

9k Double XL

Automotive Lift

Product range
General Repair


The John Bean® 9K double XL general purpose scissor lift is designed to accommodate a wide range of vehicles. Its low-profile design allows for easy drive over and can be set up as a flush mount or surface mount configuration.

  • Part Number:  SOET9000

  • Low-profile drive over height of 5.3"

  • Lifts straight upward with no fore or aft movement

  • Open front and rear with no cross member for maximum accessibility

  • Dual hydraulic synchronization

  • 18 mechanical locking positions with air actuated release

  • Non-slip textured lifting pad surface

  • Surface mount or flush mount configurations are available

  • Extendible lifting pad, from 61.25" to 81.5"

  • For best performance and maximum versatility to service the widest range of vehicles, all surface mount installed lifts should be installed with the platforms at 23" apart and with the SOET9000LW kit

  • The SOET9000LW kit includes long drive over ramps for low clearance vehicles; height 4", overall length including the SOET9000 lift 164", outriggers for increased drive over for wide vehicles and additional SOE-VZ975074 connectible rubber blocks

  • Flush mount SOET9000FM lifts should be ordered with SOE-VZ970052 hose extension kit and SOE-VZ970133 foundation insert plates

  • Conforms with current ANSI/ALI ALCTV:2011 lift standard

Expand ▼ Collapse ▲


9k Double XL Scissor Lift Brochure
File size : 783.48 Kb


Capacity Kg
Capacity 9000 lbs
Lifting times 53 s
Lowering times s
Lifting height 79.75 inch
Lifting height mm
Maximum pad height from floor mm
Maximum pad height from floor inch
Drive-through width inch
Drive-through width mm
Motor Hp
Power supply 230V 1Ph 50/60Hz
Distance between columns mm
Distance between columns inch
Short arm extraction mm
Short arm extraction inch
Long arm extraction mm
Long arm extraction inch
Minimum ceiling height mm
Minimum ceiling height inch
Minimum concrete thickness mm
Minimum concrete thickness inch
Width Between Runways inch
4 Wheel Alignment Wheelbase inch
2 Wheel Alignment Wheelbase inch
Console Dimensions DxWxH 11.75" x 11.3125" x 39.375" inch
Air Supply Requirements 90 Psi
Front Accessibility
Overall Length 80.5" inch
Service Wheelbase inch
Overall Width 83.4375" inch
Column Height inch
Column Width inch
Column Depth inch
Height of Lifting Fork inch
Length of Fork inch
Lifting Capacity Per Column lbs
Lifting Speed 53 s
Load Capacity Per Set of Four Columns lbs
Load Capacity Per Set of Six Columns lbs
Lowered Wheel Fork Height inch
Lowering Speed s
Runway Width inch
Weight per Column lbs
Width of Lifting Fork inch