Diagnostic Wheel Balancer
Diagnostic Wheel Balancer
The B2000P is the only automated diagnostic wheel balancing system that offers touchless measurement and analysis. Automatic inputs remove the chance for error and inaccurate results. When combined with precise wheel balancing, the Runout Force Vectoring (RFV) diagnostics assure uniformity based total ride quality.
Part Number: EEWB582AP230
Runout Measurement - Hundreds of thousands of measurement points are taken with a resolution of 0.004" (0.1 mm) to create a 3D model of the tire and wheel assembly.
Laser Based Runout - Quickly and easily provides advanced geometry related measurements, using technology that surpasses the performance of mechanical roller-based systems.
Automatic 3D Tire Laser Mapping System - High-resolution camera and laser based topography mapping emulated the same technology used by tire manufacturers in industrial applications. Tire tread and sidewall color analysis allows depth, wear and abnormalities to be displayed in a simple to interpret format.
Automatic Inputs - Optical scanners automatically measure the wheel. The scanners recognize the wheel type/edge. Correct weight type and size are shown to aid productivity.
Automatic Balance Measurements - The color display shows the location of any imbalance and identifies the optimal tape of clip-on weight location. Automatically measures assembly and rim runout and calculates runout force vectoring for a quick fix match-mounting solution.
Automatic Behind the Spoke Weight Placement - A laser indicates the exact weight location behind the spoke
Patented, Automatic Power Clamp - The electromechanical power clamp device always clamps the wheel accurately with a constant force, providing a reliable and consistent condition to assure accurate and repeatable measurements.
3D Imaging Diagnostics
The type, size and position of a defect in the tire are identified, measured and visualised by non-contact 3D imaging technology.
Peak-to-peak and 1st harmonic graphs of wheel run-out are provided for an easy diagnostic of the issues. Rim run-out and matching information are provided when necessary.
PLATINUM user interface
Highly intuitive and fast touch-screen monitor with large digits, coloured weight position indicators and PLATINUM user interface – improved intuitiveness and ergonomics.
Radial run-out diagnosis of the wheel is performed during unbalance measurement, hence without compromising on productivity. High run-out is automatically detected during rim diagnosis, providing match-mounting.
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
The rim scanner automatically detects rim diameter and offset as well as the number and position of rim spokes. Then it automatically chooses balancing mode, weight types and weight positions.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Measurement system for high precision and repeatability.
|Wheel clamping||Power Clamp|
|Diameter of shaft||40 mm|
|Measuring speed||< 200 rpm|
|Balancing accuracy||0.035 oz|
|Balancing accuracy||1 g|
|Angular resolution||± 0,35°|
|Length of shaft||225 mm|
|Length of shaft||8.86 inch|
|Rim diameter range||15" - 30"|
|Offset range||1" - 20"|
|Rim width range||3" - 20"|
|Max. wheel diameter||950 mm|
|Max wheel diameter||37.4 inch|
|Max. wheel weight||70 kg|
|Max. wheel weight||154 lbs|
|Input power (VAC)||230V 1Ph 50/60Hz|
|Dimensions LxWxH||1450 x 990 x 1710 mm|
|Dimensions LxWxH||57.1" x 39" x 67.3"|
|Net weight||210 kg|
|Maximum total assembly diameter||inch|