Video Wheel Balancer
Video Wheel Balancer
Unparalleled speed and accuracy, with non-contact rim width acquisition via Smar Sonar, exact weight placement via the easyWEIGHT pinpoint laser, and a 19" monitor featuring step-by-step video instructions and an intuitive user interface.
Part Number: EEWB562AL
easyWEIGHT - A laser pointer allows fast, accurate and easy positioning of adhesive weights on the wheel.
Accurate and Quick Clamping - With the included cones or the optional stud-hole flange accessory, clamping with the included quick nut is fast and easy.
Data Entry - The B400L is equipped with semi-automatic data entry for rim diameter and offset.
Short Balance Cycle - Extremely short balancing cycle of 45 seconds.
INCLUDED FOUR CONE KIT
- Small: 1.7” - 3.15” (43.18 - 80mm)
- Medium: 2.9” - 3.9” (73.66 - 99mm)
- Large: 3.8” - 4” (96.52 - 101.6mm)
- Truck: 3.42” - 5.25” (86.87 - 133.35mm)
EZ-Collets Mobile App helps service technicians identify the best tools for their wheel balancing procedures. Using the mobile app, service professionals can find the best collet, flange, or quick plate for a wheel balancing job by selecting the vehicle and comparing the options and benefits of each tool. The app also provides information about the tire and rim for the selected vehicle and is free to download through the Apple and Google stores - email activation required.
EZ-Collets mobile app
The EZ-Collets mobile app makes wheel balancing more efficient.
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
Easy to operate with a comfortable touch panel
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Measurement system for high precision and repeatability.
|Wheel clamping||Quick Nut|
|Diameter of shaft||40 mm|
|Measuring speed||< 200 rpm|
|Balancing accuracy||0.035 oz (1 g)|
|Length of shaft||225 mm|
|Start/Stop balance time - Check spin (Wheel 195/65R15)||4.5 s|
|Manual rim diameter range||8" - 32"|
|Manual offset range||1" - 20"|
|Manual rim width range||1" - 20"|
|Semi-automatic rim diameter range||8" - 25"|
|Semi-automatic rim width range||3" - 15"|
|Max. wheel diameter||42"|
|Max. wheel weight||154 lbs (70 kg)|
|Power requirements||115 VAC 1ph 50/60 Hz – 1.1A|
|Dimensions LxWxH (Unit only)||51.6" x 34.1" x 72.2"|
|Net Weight||253.5 lbs (115 kg)|