VAS 6311A
Diagnostic Car Wheel Balancer with Touch Screen and 3D Camera Technology
PRODUCT DESCRIPTION
The diagnostic wheel balancer for high-end tyre shops, car dealerships and garages, tuning shops and car manufacturers.
With 3D camera technology: 5 CCD cameras scan tyre and rim from different directions with special 3D laser stripes.
In a single measuring run all data is detected and possible defects in tyre or rim are diagnosed and documented with utmost accuracy.
Features:
- RECOMMENDED BY VOLKSWAGEN
- Measurement of tyre pull effect (tyre conicity)
- Allocation of wheels to their best possible position on the vehicle in order to avoid tyre pull effect (OptiLine function - optional)
- Detection of flat spots on the tyre
- Detection of possible damage to tyre sidewallChecking of bead seat
- Measurement of radial and lateral run-out of tyre and/or rim
- Tread depth measurement in 5 different positions and visualisation on screen
- Tread wear analysis (signalling need for wheel alignment)
- User-friendly touch screen monitor for visualisation of the diagnostic results in brilliant 3D colour maps
- Graphical user interface for intuitive user-machine communication and high-productivity diagnostic wheel balancing
- Print-out of all results in test records, or screenshots via optional printer. Output also to USB memory stick.
- Documentation of the condition of a set of wheels
- Patented virtual plane measurement technique
- Automatic non-contact acquisition of wheel data and balancing mode (weight type and position)
- Automatic non-contact identification of number and position of spokes for split-weight mode
- Relocation of weight position via gauge arm with AutoStopSystem and patented adhesive wheel weight clamp
- Diagnostics of unsmooth ride and optimisation in a single additional step
- Electro-mechanical clamping device for accurate clamping and centring of the wheel
- asanetwork capability via optional software client
- Finish in RAL 7040
FEATURES
3D imaging diagnostics
The type, size and position of a defect in the tyre are identified, measured and visualised by non-contact 3D imaging technology.
easyWEIGHT™
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Match-mounting
Radial run-out diagnosis of the wheel is performed during unbalance measurement, hence without compromising on productivity. High run-out is automatically detected during rim diagnosis, providing match-mounting.
PLATINUM user interface
Highly intuitive and fast touch-screen monitor with large digits, coloured weight position indicators and PLATINUM user interface – improved intuitiveness and ergonomics.
Radial run-out
Peak-to-peak and 1st harmonic graphs of wheel run-out are provided for an easy diagnostic of the issues. Rim run-out and matching information are provided when necessary.
Rim scanner
The rim scanner automatically detects rim diameter and offset as well as the number and position of rim spokes. Then it automatically chooses balancing mode, weight types and weight positions.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
Wheel guard
The patented and ergonomic telescopic wheel guard reduces the footprint.
easyALU™
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
Power Clamp™
Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Power Clamp |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 1g |
| Angular resolution | ± 0.35° |
| Length of shaft | 225mm |
| Rim diameter range | 15in-30in |
| Offset range | 1in-20in |
| Rim width range | 3in-20in |
| Max. wheel diameter | 950mm |
| Max. wheel weight | 70kg |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1450 x 990 x 1710 mm |
| Net weight | 210kg |
*Snap-on reserves the right to make changes to specifications without notice and without making changes retroactively.
| Motorized | |
| Wheel clamping | |
| Diametre of shaft | |
| Measuring speed | |
| Balancing accuracy | |
| Balancing accuracy | |
| Angular resolution | |
| Rim diameter range | |
| Offset range | |
| Rim width range | |
| Max. wheel diameter | mm |
| Max wheel diameter | inch |
| Input power (VAC) | |
| Dimensions LxWxH | |
| Dimensions LxWxH | |
| Net weight | kg |
