BT 4616

Brake tester for cars and trucks up to 16 t axle load

BT 4616

Brake tester for cars and trucks up to 16 t axle load


Easy preparation of foundation. No built-in frame or mounting parts required for the foundation. Installation depth as low as 380 mm only

  • Analogue display with double scale for LH and RH sides

  • Display cabinet to be fitted on wall

  • Measuring range is automatically switched over

  • Key-locked main switch and function light kit

  • Two-part self-supporting galvanised roller set

  • Rollers with expanded metal mesh and long-life plastic coating

  • Alternatively: Rollers with SmoothGrip (steel roller designed for spiked tyres)

  • Rollers at drive-on side elevated by 50 mm

  • Alternatively: level rollers, dual direction testing, 4WD mode (remote control unit required)

  • If required, weighing system is integrated in roller set

  • 30 m connecting cables from roller set to display cabinet

  • Motor rating 2 x 11 kW, motors provided at drive-off side

  • The use of brake testers is subject to national standards and legal requirements

Expand ▼ Collapse ▲


File size : 1,097.24 Kb


Brake tester/Test lane Max. drive-over load (t) 16
Brake tester Roller coefficient dry / wet > 0.7 - > 0.6
Brake tester Temperature range (°C) 0 - 40
Brake tester Idling speed (km/h) 2.7 / 5.4
Brake tester Roller diameter (mm) 255
Brake tester Roller length (mm) 1200
Brake tester Roller elevation (mm) 50
Brake tester Length (mm) 2 x 1390
Brake tester Width (mm) 2 x 1560
Brake tester Height (mm) 2 x 380
Brake tester Weight (kg) 2 x 960
Brake tester Power supply (V/Hz) 400 / 50
Brake tester Supply lead (mm²) 5 x 10
Brake tester Fuse rating, slow-blow (A slow-blow) 3 x 50
Brake tester Motor power (kW) 2 x 11
Display cabinet Measuring range (kN) 0 - 8 / 0 - 40
Display cabinet Width (mm) 800
Display cabinet Depth (mm) 200
Display cabinet Height (mm) 600
Display cabinet Weight (kg) 35
Weight Roller(s) (kg) 960


BT 4616 PC

Analogue display, double scale: indicating range 0-8 / 0-40 kN, two-part galvanised roller set, rollers with expanded metal mesh and wear-proof plastic coating or alternatively in SmoothGrip design, rollers 1200 mm long, rear rollers elevated by 50 mm, motors located at drive-off end