B340S
Car Wheel Balancer with PROtouch™ Display
PRODUCT DESCRIPTION
The wheel balancer for tyre shops, car dealerships and garages with medium tyre service volume. With PROtouch™ - the touch-screen graphical display with DIAMOND user interface – the B340 is as intuitive as a video balancee
RECOMMENDED BY RENAULT
PROtouch™ - the touchscreen graphical display, 10” wide, with DIAMOND user interface – makes the B340 as intuitive as a video balancer
Semi-automatic input of offset and rim diameter via 2D SAPE and automatic rim width acquisition via Smart Sonar – fast and easy
Semi-automatic pre-selection of balancing mode via easyALU
Split weight mode
Weight minimisation and optimisation
Two users with rapid switch function
Network printing capability – Compatible with asanetwork
WI-FI connectivity
VPM imaging technique for uncompromised accuracy
QuickBAL™ for reduced measurement time:
Short start-stop cycle time: 4.5 seconds (15” rim)Clamping of wheel on integrated flange with quick nut
Mechanical main shaft lock
FEATURES
proTOUCH ™
Intuitive as a video balancer, fast user interface, large digits, touchscreen and antiglare display.
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
Multiple users
Two operators can operate with the balancer simultaneously and quickly recall their rim dimensions.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
Stop in position
Touch the screen to automatically rotate the wheel to weight application position.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Quick nut |
| Diametre of shaft | 40 mm |
| Measuring speed | < 200 rpm |
| Balancing accuracy | |
| Balancing accuracy | 1 |
| Angular resolution | ± 0,35° |
| Lenght of shaft | 225 mm |
| Lenght of shaft | 8.86 inch |
| Start/Stop balance time - Check spin | 4.5 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | inch |
| Max. wheel weight | 70 kg |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1330 x 870 x 1880 |
| Dimensions LxWxH | |
| Net weight | 115 kg |
