B500P
Car Wheel Balancer with LED Display
PRODUCT DESCRIPTION
The wheel balancer for tyre shops, car dealerships and garages with medium tyre service volume: with the easyWeight pinpoint indicator light – an accurate, fast and easy solution to position adhesive weights on the wheel
RECOMMENDED BY OPEL
With torque-controlled Power Clamp device
Intuitive dual 3-digit LED display for the amount readings and bright weight position indicators – in ergonomic raised position
easyWeight: Pinpoint laser light indicator to accurately and conveniently position adhesive weights on the wheel.
Semi-automatic input of offset and rim diameter via 2D SAPE and automatic rim width acquisition via Smart Sonar – fast and easy
Semi-automatic pre-selection of balancing mode via easyAlu
Imbalance minimisation and optimisation programs
VPM measurement technique for uncompromised accuracy
QuickBal for reduced measurement time:
Short start-stop cycle time: 4.5 seconds (15" rim)New ergonomic weight tray
Finish RAL 7035
FEATURES
easyWEIGHT™
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Ergonomic display
The raised display increases ergonomic handling.
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
easyALU™
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
Power Clamp™
Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Power Clamp |
| Diametre of shaft | 40 mm |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz |
| Balancing accuracy | 1 g |
| Angular resolution | ± 0,35° |
| Lenght of shaft | 225 mm |
| Lenght of shaft | 8.86 inch |
| Start/Stop balance time - Check spin | 4 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | 42 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (amperage) | 1.1 A |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1383 x 878 x 1834 |
| Dimensions LxWxH | 54.5" x 34.6" x 77.2" |
| Net weight | 115 kg |
