Diagnostic Wheel Balancer
Diagnostic Wheel Balancer
The B2000P is the only automated diagnostic wheel balancing system that offers touchless measurement and analysis. Automatic inputs remove the chance for error and inaccurate results. When combined with precise wheel balancing, the Runout Force Vectoring (RFV) diagnostics assure uniformity based total ride quality.
Part Number: EEWB582AP230
Runout Measurement - Hundreds of thousands of measurement points are taken with a resolution of 0.004" (0.1 mm) to create a 3D model of the tire and wheel assembly.
Laser-Based Runout - Quickly and easily provides advanced measurements, using technology that surpasses the performance of mechanical, roller-based systems.
Automatic 3D Tire Laser Mapping System - High-resolution camera and laser-based topography mapping emulate technology used by tire manufacturers in industrial applications. Tire tread and sidewall color analysis allow depth, wear, and abnormalities to be displayed in a simple to interpret format.
Automatic Inputs - Optical scanners automatically measure the wheel. The scanners recognize the wheel type/edge. Correct weight type and size are shown to aid productivity.
Automatic Balance Measurements - The color display shows the location of any imbalance and identifies the optimal tape of clip-on weight location. Automatically measures assembly and rim runout and calculates runout force vectoring for a quick fix match-mounting solution.
Automatic Behind the Spoke Weight Placement - A laser indicates the exact weight location behind the spoke
Patented, Automatic Power Clamp - The electromechanical power clamp device always clamps the wheel accurately with a constant force, providing a reliable and consistent condition to assure accurate and repeatable measurements.
3D Imaging Diagnostics
The type, size and position of a defect in the tire are identified, measured and visualised by non-contact 3D imaging technology.
Peak-to-peak and 1st harmonic graphs of wheel run-out are provided for an easy diagnostic of the issues. Rim run-out and matching information are provided when necessary.
Radial run-out diagnosis of the wheel is performed during unbalance measurement, hence without compromising on productivity. High run-out is automatically detected during rim diagnosis, providing match-mounting.
Automatic Spoke Detection
Scanner automatically detects number and position for rim spokes. Provides easy recall of split weight mode for hidden adhesive weights by simply pressing an icon on the screen.
A tool that allows equipment to be connected to a garage. With the asanetwork, all relevant information is made available at every workstation in the shop as all machines are connected to the commercial software.
Facilitates application of the wheel balancer gauge arm.
Stop in position
Touch the screen to automatically rotate the wheel to weight application position.
Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Touch the rim with the arm to enter the rim dimensions.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
30% reduced cycle time, less than 4.5 seconds, maintaining the same high accuracy.
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Measurement system for high precision and repeatability.
|Wheel clamping||Power Clamp|
|Diameter of shaft||40 mm|
|Measuring speed||< 200 rpm|
|Balancing accuracy||0.035 oz (1 g)|
|Angular resolution||± 0.35°|
|Length of shaft||225 mm|
|Start/Stop balance time - Check spin (Wheel 195/65R15)||8 s|
|Manual rim diameter range||8" - 32"|
|Manual offset range||1" - 20"|
|Manual rim width range||1" - 20"|
|Automatic rim diameter range||14" - 26"|
|Automatic offset range||4.7" - 16.3"|
|Automatic rim width range||3" - 15.8"|
|Max. wheel diameter||44"|
|Max. wheel weight||154 lbs (70 kg)|
|Power requirements||230 VAC 1ph 50/60 Hz1.1A|
|Dimensions LxWxH (Unit only)||62" x 48" x 74"|
|Net Weight||341 lbs (155 kg)|