Video Wheel Balancer
Video Wheel Balancer
The B200S high-performance wheel balancing system is ideal for all shops - small footprint complimented by the video display provides high-end features in a compact design. In under ten seconds, the color display shows the location of any imbalance and identifies the optimal tape on or clip-on weight location. The fast spin cycle provides an accurate measurement with minimum cycles for fast results.
Part Number: EEWB556AS
Ideal for All Shops - Small footprint complimented by the video display provides high-end features in a compact design.
Intuitive Interface - A user-friendly interface where all functions are clearly marked with picture icons. Large digits for the amount of balance weight and bright indicators for weight position.
Accurate and Quick Clamping - With the included cones or the optional stud-hole flange accessory, clamping with the included quick nut is fast and easy.
Data Entry - The B200S is equipped with semi-automatic data entry for rim diameter and offset.
Short Balancing Cycle - Extremely short balancing cycle of 4.5 seconds.
EZ-Collets Mobile App helps service technicians identify the best tools for their wheel balancing procedures. Using the mobile app, service professionals can find the best collet, flange, or quick plate for a wheel balancing job by selecting the vehicle and comparing the options and benefits of each tool. The app also provides information about the tire and rim for the selected vehicle and is free to download through the Apple and Google stores - email activation required.
EZ-Collets mobile app
The EZ-Collets mobile app makes wheel balancing more efficient.
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
Easy to operate with a comfortable touch panel.
Touch the rim with the arm to enter the rim dimensions.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
30% reduced cycle time, less than 4.5 seconds, maintaining the same high accuracy.
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Measurement system for high precision and repeatability.
|Wheel clamping||Quick Nut|
|Diameter of shaft||40 mm|
|Measuring speed||< 200 rpm|
|Balancing accuracy||0.035 oz (1 g)|
|Length of shaft||225 mm|
|Start/Stop balance time - Check spin (Wheel 195/65R15)||4.5 s|
|Manual rim diameter range||8" - 32"|
|Manual offset range||1" - 20"|
|Manual rim width range||1" - 20"|
|Semi-automatic rim diameter range||8" - 25"|
|Semi-automatic rim width range||3" - 15"|
|Max. wheel diameter||42"|
|Max. wheel weight||154 lbs (70 kg)|
|Power requirements||230 VAC 1ph 50/60 Hz – 1.1A|
|Dimensions LxWxH (Unit only)||40" x 31" x 72"|
|Net Weight||220.4 lbs (100 kg)|