B340P
General Service Wheel Balancer
PRODUCT DESCRIPTION
The B340 wheel balancer is the ideal solution for independent tire shops, garages and dealers; offering high performance, small physical footprint and accurate balancing results in the first run. Our PROtouch™ technology provides intuitive operation with a wide, heavy-duty touchscreen for ease-of-use and improved ergonomics.
Part Number: EEWB581APE7
PROTouch™ – Intuitive operation given by the wide screen, large digits for the amount of the balance weight and bright indicators for the weight position. Ergonomics and ease of use with touchscreen user interface.
Patented Power Clamp - Electromechanicaly clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
easyWEIGHT™ – Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Smart Sonar™ – Automatic, non-contact rim width acquisition delivers greater accuracy and ease-of-use for a 30% savings in a complete process when compared to manual operation.
easyALU™ - Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
QuickBAL™ - 30% reduced cycle time, less than 4.5 seconds, maintaining the same high accuracy.
Multiple Users - Two operators can operate with the balancer simultaneously and quickly recall their rim dimensions.
Included Accessories:
- Four Cone Kit (EAK0309J28A)
- Weight Pliers (00058839000)
- Accessory Kit for Power Clamp (EAA0307G54A)
- Four Cone Kit (EAK0309J28A)
FEATURES
asanetwork
A tool that allows equipment to be connected to a garage. With the asanetwork, all relevant information is made available at every workstation in the shop as all machines are connected to the commercial software.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
Stop in position
Touch the screen to automatically rotate the wheel to weight application position.
Power Clamp™
Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
easyWEIGHT™
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
easyALU™
Touch the rim with the arm to enter the rim dimensions.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
QuickBAL™
30% reduced cycle time, less than 4.5 seconds, maintaining the same high accuracy.
Multiple users
Two operators can operate with the balancer simultaneously and quickly recall their rim dimensions.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
VPI technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Wheel clamping | Power Clamp |
| Diameter of shaft | 40 mm |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz (1 g) |
| Angular resolution | ±0.35° |
| Length of shaft | 225 mm |
| Start/Stop balance time - Check spin (Wheel 195/65R15) | 4.5 s |
| Manual rim diameter range | 8" - 32" |
| Manual offset range | 1" - 20" |
| Manual rim width range | 1" - 20" |
| Semi-automatic rim diameter range | 8" - 25" |
| Semi-automatic rim width range | 3" - 15" |
| Max. wheel diameter | 42" |
| Max. wheel weight | 154 lbs (70 kg) |
| Motorized | Yes |
| Power requirements | 230 VAC 1ph 50/60 Hz – 1.1A |
| Dimensions LxWxH (Unit only) | 52" x 34" x 74" |
| Net Weight | 253.5 lbs (115 kg) |
Versions
The B340 wheel balancer is the ideal solution for independent tire shops, garages and dealers; offering high performance, small physical footprint and accurate balancing results in the first run. Our PROtouch™ technology provides intuitive operation with a wide, heavy-duty touchscreen for ease-of-use and improved ergonomics.