B500S
Digital Wheel Balancer
PRODUCT DESCRIPTION
The wheel balancer for tire shops, car dealerships and garages with medium tire service volume: with the easyWeight pinpoint indicator light – an accurate, fast and easy solution to position adhesive weights on the wheel
Part Number: EEWB564AS
Accurate and Quick Clamping - With the included cones of the optional stud-hold flange accessory, clamping is fast and easy.
Intuitive Interface - The raised high-contrast LED display is easy to see in all conditions. Balance weight, weight position and user input are clearly indicated.
easyWEIGHT - A laser pointer allows fast, accurate and easy positioning of adhesive weights on the wheel, by indicating weight location on the bottom of the rim, the operator can ergonomically place weights quickly, accurately and without error.
Short Balancing Cycle - The extremely short balancing cycle (start/stop) of 4.5 seconds as well as automatic rim width acquisition via Smart Sonar together with rim diameter and offset measurement via 2D-SAPE makes this balancer the ideal solution for high-volume workshops.
FEATURES
easyWEIGHT™
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Ergonomic display
The raised display increases ergonomic handling.
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
QuickBAL™
30% reduced cycle time, less than 4.5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
VPI technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Quick nut |
| Diameter of shaft | |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz |
| Balancing accuracy | 1 g |
| Angular resolution | ± 0,35° |
| Length of shaft | 225 mm |
| Length of shaft | 8.86 inch |
| Start/Stop balance time - Check spin | 4 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | 42 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (VAC) | 230V 1Ph 50/60Hz |
| Dimensions LxWxH | 1383 x 878 x 1834 |
| Dimensions LxWxH | 54.5" x 34.6" x 77.2" |
| Net weight | 140 kg |
| Maximum total assembly diameter | inch |