B1200P

Car Wheel Balancer with Non-Contact Data Entry and Diagnostic Functions

Premium Service

B1200P

Car Wheel Balancer with Non-Contact Data Entry and Diagnostic Functions

Premium Service

PRODUCT DESCRIPTION

The wheel balancer with diagnostic functions for tyre shops, garages and car dealerships with high tyre service volume. With touchscreen monitor and automatic non-contact data entry. Unbalance measurement and run-out diagnosis are performed in a single fast measuring run.

  • High-productivity wheel balancer

  • Rim scanner for
    - automatic non-contact rim profiling
    - automatic selection of balancing mode and weight position
    - automatic acquisition of rim diameter and offset

  • Smart Sonar for automatic non-contact acquisition of rim width

  • Run-out diagnosis combined with unbalance measurement in a single fast measuring run

  • Recommendation for match-mounting, when possible, to reduce vibrations caused by radial run-out

  • Touchscreen monitor with graphical user interface PLATINUM – fast and very intuitive

  • easyWeight: fast pinpoint bottom weight placement. Pinpoint laser light indicator to accurately position adhesive weights on the wheel

  • Torque-controlled Power Clamp device – fast and accurate clamping of the wheel

  • Stop-in-Position feature where the operator only has to touch the amount of unbalance on the screen and the wheel is automatically indexed to correction position 

  • Torque-controlled Power Clamp device – fast and accurate clamping of the wheel

  • Stop-in-Position feature where the operator only has to touch the amount of unbalance on the screen and the wheel is automatically indexed to correction position

  • QuickBal for reduced measurement time:
    Short start-stop cycle time: 4.5 seconds (15" rim)

  • VPM measurement technique for uncompromised accuracy

  • Rim lighting to facilitate rim cleaning and speed up data entry and weight positioning

  • Imbalance minimisation and optimisation programs

  • Networking capability with the optional networking software

  • Compatible with asanetwork

  • Print-out with optional printer

Expand ▼ Collapse ▲

FEATURES

asanetwork

asanetwork

It is a tool that allows equipment to be connected to a garage.
With the asanetwork all relevant information are made available at every workstation in the shop as all machines are connected to the commercial software.

easyWEIGHT™

feat-easyweight

Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.

Match-mounting

feat-matchmounting

Radial run-out diagnosis of the wheel is performed during unbalance measurement, hence without compromising on productivity. High run-out is automatically detected during rim diagnosis, providing match-mounting.

PLATINUM interface

feat-platinumuserinterface

Highly intuitive and fast touch-screen monitor with large digits, coloured weight position indicators and PLATINUM user interface – improved intuitiveness and ergonomics.

Radial run-out

feat-radialrunout

Peak-to-peak and 1st harmonic graphs of wheel run-out are provided for an easy diagnostic of the issues. Rim run-out and matching information are provided when necessary.

Rim scanner

feat-rimscanner

The rim scanner automatically detects rim diameter and offset as well as the number and position of rim spokes. Then it automatically chooses balancing mode, weight types and weight positions.

Split weight mode

feat-splitweightmode

Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.

Wheel guard

feat-wheelguard

The patented and ergonomic telescopic wheel guard reduces the footprint.

Power Clamp™

feat-power-clamp

Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.

QuickBAL™

feat-quickbal

30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.

Smart Sonar™

feat-smart-sonar

Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.

VPM technique

feat-vpm-technique

Measurement system for high precision and repeatability.

Oversize shaft

feat-oversizeshaft

The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.

MEDIA

9702819_B1200P_GB_2016.12.pdf
File size : 933.35 Kb

TECH SPECS

Motorized Yes
Wheel clamping Power Clamp
Diametre of shaft 40 mm
Measuring speed < 200 rpm
Balancing accuracy 0.035 oz
Balancing accuracy 1 g
Angular resolution ± 0,35°
Lenght of shaft 225 mm
Lenght of shaft 8.86 inch
Start/Stop balance time - Check spin 4.5 s
Rim diameter range 8" - 32"
Offset range 1" - 20"
Rim width range 1" - 20"
Max. wheel diameter 1050 mm
Max wheel diameter 42 inch
Max. wheel weight 70 kg
Max. wheel weight 154 lbs
Input power (VAC) 230 VAC 1ph 50/60 Hz
Dimensions LxWxH 1362 x 1001 x 1895
Dimensions LxWxH
Net weight 135 kg

ACCESSORIES

Clamping plate
Clamping plate

Ø 200 mm

Centring cone for light-truck wheels
Centring cone for light-truck wheels

Ø 113-170 mm,
to be used in conjunction with spacer ring

Centring cone for light-truck wheels
Centring cone for light-truck wheels

Ø 195-214 mm
to be used in conjunction with spacer ring

Kit for light truck wheels
Kit for light truck wheels

consisting of cone Ø 113 -170 mm + spacer

Light truck kit
Light truck kit

Spacer and cone Ø 122-172 mm

Plastic spacer ring for light truck wheels
Plastic spacer ring for light truck wheels

to be clamped with centring cones or with a studhole flange plate

Set of 9 low-taper centring collets
low-taper centring collets

set of 9                                                 Ø 52.5-122 mm / 2" - 4..8"

Universal adaptor SCA
Universal adaptor SCA

for closed 3-, 4-, 5-stud rims; for all Y2k balancers with 40mm tapered shaft
For all 3-, 4- and 5-stud rims which are stud-hole located. Pitch circles of Ø 95-215 mm are infinitely and centrally adjustable.