VAS 741 019
Car Wheel Balancer with Touchscreen Monitor and Integrated Wheel Lift
PRODUCT DESCRIPTION
The wheel balancer for garages, car dealerships, tyre shops and premium workshops with high tyre service volume.
RECOMMENDED BY VOLKSWAGEN
High-productivity wheel balancer
Rim scanner for
- automatic non-contact rim profiling
- automatic selection of balancing mode and weight position
- automatic acquisition of rim diameter and offsetSmart Sonar for automatic non-contact acquisition of rim width
Touchscreen monitor with graphical user interface PLATINUM – fast and very intuitive
easyWeight: fast pinpoint bottom weight placement. Pinpoint laser light indicator to accurately position adhesive weights on the wheel
Alternative positioning of adhesive weights with the geodata gauge arm
Torque-controlled Power Clamp device – fast and accurate clamping of the wheel
Stop-in-Position feature where the operator only has to touch the amount of unbalance on the screen and the wheel is automatically indexed to correction position
QuickBal for reduced measurement time:
Short start-stop cycle time: 4.5 seconds (15’’ rim)VPM measurement technique for uncompromised accuracy
Telescopic wheel guard – requiring no additional back space
New ergonomic weight tray
Rim lighting to facilitate application of the geodata gauge arm
Imbalance minimisation and optimisation programs
High capacity, wheels up to 42” of diameter and 70 kg of weight
Networking capability with the optional networking software
Compatible with asanetwork
Print-out with optional printer
BW4030 – the ultimate wheel lift for wheel balancers, integrated in the cabinet, operated by the balancer's logic, automatically lifting a wheel of the same set to the correct height and consequently improving centring and clamping of the wheel
Finish RAL 7040
FEATURES
easyWEIGHT™
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
PLATINUM interface
Highly intuitive and fast touch-screen monitor with large digits, coloured weight position indicators and PLATINUM user interface – improved intuitiveness and ergonomics.
Rim scanner
The rim scanner automatically detects rim diameter and offset as well as the number and position of rim spokes. Then it automatically chooses balancing mode, weight types and weight positions.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
Wheel guard
The patented and ergonomic telescopic wheel guard reduces the footprint.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Wheel lift
The ultimate wheel lift for an easy and fast handling of wheels up to 70 kg. The wheel is automatically raised to the last centring height and the platform automatically returns to rest position, thus reducing floor-to-floor cycle time.
easyALU™
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
Power Clamp™
Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Power Clamp |
| Diametre of shaft | |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz |
| Balancing accuracy | 1 g |
| Angular resolution | ± 0,35° |
| Lenght of shaft | 225 mm |
| Lenght of shaft | 8.86 inch |
| Start/Stop balance time - Check spin | 4 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | 42 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (amperage) | 1.1 A |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1940x1020x1570 |
| Dimensions LxWxH | 76.4" x 40.2" x 61.8" |
| Net weight | kg |
Versions
The wheel balancer for garages, car dealerships, tyre shops and premium workshops with high tyre service volume. With touchscreen monitor, automatic non-contact data entry and easyWeight pinpoint indicator light – An accurate, fast and easy solution to position adhesive weights on the wheel.
