B200S
Video Wheel Balancer
PRODUCT DESCRIPTION
The B200S high-performance wheel balancing system is ideal for all shops - small footprint complimented by the video display provides high-end features in a compact design. In under ten seconds, the color display shows the location of any imbalance and identifies the optimal tape on or clip-on weight location. The fast spin cycle provides an accurate measurement with minimum cycles for fast results.
Part Number: EEWB556AS
Ideal for All Shops - Small footprint complimented by the video display provides high-end features in a compact design.
Intuitive Interface - A user-friendly interface where all functions are clearly marked with picture icons. Large digits for the amount of balance weight and bright indicators for weight position.
Accurate and Quick Clamping - With the included cones or the optional stud-hole flange accessory, clamping with the included quick nut is fast and easy.
Data Entry - The B200S is equipped with semi-automatic data entry for rim diameter and offset.
Short Balancing Cycle - Extremely short balancing cycle of 4.5 seconds.
FEATURES
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
Touch panel
Easy to operate with a comfortable touch panel.
easyALU™
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
VPI technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Quick nut |
| Diameter of shaft | |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz |
| Balancing accuracy | 1 g (0.035 oz) |
| Angular resolution | ± 0,35° |
| Length of shaft | 225 mm |
| Length of shaft | 8.85827 inch |
| Start/Stop balance time - Check spin | 4 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | 42 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (VAC) | 230V 1Ph 50/60Hz |
| Dimensions LxWxH | 1012 x 781 x 1834 |
| Dimensions LxWxH | 40" x 30" x 72" |
| Net weight | 82 kg |
| Maximum total assembly diameter | inch |