JLF 4000

4-POST WHEEL ALIGNMENT LIFT

JLF 4000

4-POST WHEEL ALIGNMENT LIFT

PRODUCT DESCRIPTION

The JLF 4000, together with the wide range of John Bean 3D wheel aligners, offers the perfect combination for wheel alignment of all vehicles

  • The integrated rear sliding plates guarantee that a four wheel alignment can be performed on all vehicles with wheel bases from 1.930 mm up to 4.150 mm. Each ones is equipped with 3 pieces of multiple plastic rollers

  • Control unit: with emergency switch and comfort lowering which allows the automatic release of the carriage from the safety lock when lowering the lift

  • The sliding jack increases the lift's versatility (optional)

  • The turnplates are integrated in the runways and can be placed in 3 different positions to support a wide range of wheel bases (optional)

  • Safety ladder: allows to level the lift and to set the runways in the locked position for wheel alignment

  • Comfort lowering: the lift will automatically go up a little bit to release the carriage from the safety lock and then automatically lower the vehicle

  • The ramps are designed to allow cars with lowered chassis to drive on the lift without any damage

Expand ▼ Collapse ▲

FEATURES

Ramps

Ramps

With the length of 1.060 mm a drive on angle of 10°is possible keeping the overall length of the complete lift below 6.400 mm

Comfort lowering

Comfort lowering

Lowering the vehicle is done by simply pushing the lowering button for themost easiest and convenient operation

Cable system

Cable system

Rugged brass pulleys ensure long life of the lift

Control unit

control unit

Clear and easy to understand, with emergency switch and comfort lowering

Turntables (optional)

Turntables

Turntables can be placed in 3 different positions to support a wide range of wheel bases

Jack (optional)

Jack

3000 kg lifting capacity

MEDIA

JLF 4000_EN
File size : 3,124.46 Kb

TECH SPECS

Capacity 4000 Kg
Capacity lbs
Lifting times 40 s
Lowering times s
Lifting height inch
Lifting height 1830 mm
Maximum pad height from floor mm
Maximum pad height from floor inch
Drive-through width inch
Drive-through width mm
Motor
Power supply 400 VAC 3ph 50Hz
Distance between columns mm
Distance between columns inch
Short arm extraction mm
Short arm extraction inch
Long arm extraction mm
Long arm extraction inch
Minimum ceiling height mm
Minimum ceiling height inch
Minimum concrete thickness mm
Minimum concrete thickness inch