12k Four Post
12k Four Post
Versatile 12k four-post alignment lifts give you 12,000 lbs of heavy-duty lifting capacity in a compact and stable lift design without the need for multiple lifts. Whether it is a micro car or a heavy-duty pickup, the 12k four-post alignment lift has four-wheel alignment capabilities that cover a full range of vehicle requirements.
Part Number: EELR529APKG
A conveniently packaged alignment lift with 20.5” wide “Pro-Style” runways, 2 roller jacking systems, premium turn plates and roll back kit that provides for a complete professional grade alignment system.
Save time when loading vehicles of narrow to wide track widths on an ultra-low-profile, shake free and stable closed front design.
This unit maintains a steady and shake free surface for advanced alignment equipment measurements.
81.6” long rear slip plates means no need for repositioning of the front turn plates to accommodate for longer or shorter vehicles.
Full floating, flush mounted rear slip plates use a Delrin ball style bearing assembly similar to our time-tested heavy-duty lift to ensure ease of vehicle movement, durability and reduced maintenance.
Hydraulic cylinder mounted underneath runway.
Industry proven, brake formed front columns and traverse beam design spreads critical load forces over longer/larger supporting areas to ensure alignment accuracy.
Locking ladders mount through the traverse beams to ensure safety lock engagement.
Filter / Regulator / Lubricator (FRL) provides a clean and lubricated air supply to the lift and jack systems; improving reliability and reducing the need for maintenance.
Slack cable support system to keep cables from hanging when the lift is on the locks.
Textured approach ramps for positive vehicle traction.
|Lifting times||74 s|
|Lifting height||78 inch|
|Maximum pad height from floor||mm|
|Maximum pad height from floor||inch|
|Power supply||230V 1Ph 50/60Hz|
|Distance between columns||mm|
|Distance between columns||inch|
|Short arm extraction||mm|
|Short arm extraction||inch|
|Long arm extraction||mm|
|Long arm extraction||inch|
|Minimum ceiling height||mm|
|Minimum ceiling height||inch|
|Minimum concrete thickness||mm|
|Minimum concrete thickness||inch|
|Net weight||3307 lbs|
|Width Between Runways||40"/43" inch|
|4 Wheel Alignment Wheelbase||88.5" - 158.5" inch|
|2 Wheel Alignment Wheelbase||168.8" inch|
|Console Dimensions DxWxH||inch|
|Air Supply Requirements||90-120 Psi|
|Overall Length||251.5" inch|
|Service Wheelbase||183" inch|
|Overall Width||134.8" inch|
|Column Height||90.5" inch|
|Height of Lifting Fork||inch|
|Length of Fork||inch|
|Lifting Capacity Per Column||lbs|
|Lifting Speed||74 s|
|Load Capacity Per Set of Four Columns||lbs|
|Load Capacity Per Set of Six Columns||lbs|
|Lowered Wheel Fork Height||inch|
|Runway Width||20.6" inch|
|Weight per Column||lbs|
|Width of Lifting Fork||inch|